Although, it can be used in many applications. In combination with a LoraWan node and The Things IoT open source network, this project was developed to measure the water level in a rainwater tank. This project for a Low Power Water Level Sensor, from Hackster.io developer Amedee, uses a weather resistant sensor from our WR line.Tank level measurement, Fuel gauging, irrigation control.Then connect the control board to your PC with a USB cable.Ĭopy and paste below code to Arduino IDE and upload. You can also choose other LED modules to emit different light color like blue, green, yellow and red.Ĭonnect the LED module to control board using three jumper wires. You can combine with other sensors to do various interactive experiments. This LED module has 3 Pins - pin is connected to ground, + pin is connected to VCC（3.3-5V）, S pin is for signal control you can set the High or Low level to control the LED on and off. When connecting to ARDUINO, after programming, it will emit white light color. The main function is to control a plugin LED on and off. Now, let us embrace this fascinating world of ARDUINO and learn together! The working principle is pretty much the same. If you are good at this, you can also apply this kit to other MCU development platforms, such as 51, STM32, Raspberries Pi. So even if you are totally new at this, you can get started easily.The sample codes for this sensor kit are based on ARDUINO because it's open source and easy to use. Inside this box, there are digital and analog sensors and also some special modules such as ultrasonic, Bluetooth, acceleration module,etc.įor each module, there is clear connection diagram and sample code. We bring together 37 basic sensors and modules, aiming for the convenient learning for starters. Kesestudio 37 in 1 Sensor Kit for Arduino Starters 3.33 Project 33: SR01 Ultrasonic Sensor.

3.32 Project 32: TEMT6000 Ambient Light.3.30 Project 30: DHT11 Temperature and Humidity Sensor.3.29 Project 29: ADX元45 Three Axis Acceleration.3.28 Project 28: 18B20 Temperature Sensor.

3.27 Project 27: LM35 Linear Temperature.

3.24 Project 24: Digital IR Transmitter.

3.18 Project 18: Infrared Obstacle Avoidance.

1 kesestudio 37 in 1 Sensor Kit for Arduino Starters.

Metal touch sensor bounce